How to Light Blackstone 28” Griddle?

Whether you’re cooking for a large group or just want to be able to whip up a big batch of pancakes, the Blackstone 28” Griddle is a great option. This griddle is designed for outdoor cooking and has plenty of space to cook multiple items at once. Plus, the adjustable legs make it easy to level out on any surface.

If you’ve never used a Blackstone griddle before, here are some tips on how to light it so you can get started cooking.

  • The first step is to find a level spot to set up your griddle
  • You will need to make sure that the area is large enough to accommodate the griddle as well as any other cooking equipment you might need
  • Once you have found a suitable location, it’s time to assemble your griddle
  • Start by attaching the legs to the underside of the griddle using the supplied hardware
  • Next, connect the propane tank to the regulator and then screw the regulator onto the valve on the griddle
  • Make sure that all connections are snug and secure before moving on
  • It’s now time to open up the valve on your propane tank and turn on your gas supply at the regulator
  • Check for any leaks by applying soapy water to all connections and looking for bubbles
  • If there are no leaks, proceed to lighting your burner 5
  • To light your burner, start by opening up both side panels of the griddle top
  • Then, use a long match or lighter to ignite each burner
  • Once all burners are lit , close up both side panels and let your griddle preheat for 10-15 minutes before cooking

How to turn on a Blackstone Grill

How Do I Ignite My Blackstone Griddle?

If you’re like most people, chances are you’ve never had to ignite a Blackstone griddle. But if you find yourself in a situation where you need to do so, here’s how: 1. Start by preheating your griddle for about 15 minutes on high heat.

This will help ensure that it’s hot enough to properly ignite the fuel. 2. Next, open up the valve on the side of the griddle that controls the amount of propane flowing to it. Turn it all the way open so that maximum gas flow is achieved.

3. Now take a long lighter and hold the flame close to one of the Burners, igniting it. Once this burner is lit, move on to lighting the rest of them until all four are going strong. 4. Finally, turn off the valve on the side of the griddle and allow it to heat up for another minute or two before cooking on it as normal.

How Do You Set a 28 Inch Blackstone Griddle?

If you’re looking to cook like a pro, then you need a Blackstone griddle. These handy appliances make it easy to cook large quantities of food at once, and they’re perfect for outdoor cooking. But how do you set up a Blackstone griddle?

Here’s everything you need to know.

  Is Pop Secret Popcorn Gluten Free?
First, find a level spot outdoors to set up your griddle. You’ll also need a few supplies, including:

– A propane tank – A regulator hose – A match or lighter

Once you have all of your supplies, follow these steps: 1. Attach the regulator hose to the propane tank. Make sure the connection is tight so there are no leaks.

2. Open the valve on the propane tank and turn on the gas flow by rotating the knob clockwise. 3. Place your griddle on the stand or table and light it with a match or lighter. Hold the flame to one of the burner valves for about 30 seconds until you hear gas hissing from the igniter hole.

4 Repeat this step for each burner valve until all burners are lit.

Why is My Blackstone Griddle Not Igniting?

If your Blackstone griddle is not igniting, it is most likely due to one of the following reasons: 1. The igniter switch is not turned on. Make sure that the switch is in the “on” position.

2. There is no gas flowing to the griddle. Check the gas supply line to make sure it is turned on and that there are no leaks in the line. 3. The burner holes may be clogged.

Use a stiff wire brush to clean out any debris that may be blocking the holes. 4. The spark igniter may be defective. Try replacing the batteries in the igniter or contacting Blackstone for a replacement part.

How Do I Turn on Blackstone for the First Time?

Assuming you have a Blackstone gas grill: 1) Open the lid and remove any packaging material inside the grill. 2) Check that all control knobs are in the “off” position.

3) Connect one end of the gas regulator to the LP tank, then open the valve on the tank slowly. 4) Connect the other end of the gas regulator to the quick connect/disconnect coupling on your Blackstone grill. Hand tighten both connections until snug.

DO NOT OVER TIGHTEN!5) Open all 4 control valves (located under each knob) 1/4 turn counterclockwise with a flathead screwdriver. Be sure that each inner valve is also opened 1/4 turn (there are 2 per knob).

You will hear a slight hissing noise as gas flows through the lines. This is normal.6) Place your lit igniter next to an opening on one of the grates and push down on a control knob to activate that burner. Hold for 10-15 seconds until burner ignites, then repeat for remaining burners.

How to Light Blackstone 28'' Griddle?


Blackstone Griddle Lighting Instructions

If you’re like most people, you love the taste of food cooked on a griddle. But what you may not realize is that there’s a right way and a wrong way to light your griddle. Here are some tips to help you get it right:

  How to Delete Lime Account?

1) Use the correct fuel: If you’re using a gas griddle, be sure to use propane or natural gas. Never use gasoline, kerosene, or other flammable liquids. If you’re using a charcoal griddle, be sure to use quality briquettes.

Avoid using lighter fluid, as it can give your food an off-taste. 2) Preheat the griddle: This is important for both gas and charcoal griddles. Preheating helps ensure that your food will cook evenly and prevents sticking.

For gas griddles, preheat on high for 10-15 minutes before turning down to your desired cooking temperature. For charcoal griddles, preheat until the briquettes are covered with gray ash (about 20-30 minutes). 3) Follow the manufacturer’s instructions: Every griddle is different, so be sure to read the manufacturer’s instructions carefully before lighting it.

This will help ensure that you’re using it correctly and safely. Now that you know how to properly light your griddle, go forth and make some delicious meals!

How to Light Blackstone Adventure Ready Griddle

If you’re looking to add a little more excitement to your cooking, the Blackstone Adventure Ready Griddle is the perfect way to do it. This griddle is designed for outdoors use, so you can take your cooking to the next level. Here’s how to light the Blackstone Adventure Ready Griddle:

1. Make sure that the area around the griddle is clear and free of any flammable materials. 2. Remove the regulator from the LP tank and open the valve all the way. 3. Place the igniter on top of the burner and press down firmly until you hear a clicking sound.

4. Turn on one of the control knobs to “High” and wait for about 10 minutes for the griddle to reach cooking temperature. 5. Enjoy your meal!

Where Does the Battery Go on a 28 Blackstone Griddle

If you own or are considering purchasing a 28 Blackstone griddle, you may be wondering where the battery goes. The answer is actually quite simple – the battery goes in the back of the griddle, under the control panel. There are two screws that hold the battery cover in place, and once you remove those screws and lift up the control panel, you’ll see the battery compartment.

Simply insert your batteries and replace the cover, screwing it back into place. That’s all there is to it!


If you’re looking to light your Blackstone 28” Griddle, there are a few things you need to do. First, make sure all the vents are open so that oxygen can flow freely. Next, use a long match or lighter to ignite the burner on one side of the griddle.

Once that burner is lit, turn on the other burners until all of them are going. Finally, adjust the heat as needed and let the griddle preheat for about 15 minutes before cooking on it.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *