How to Make a Light Up Tumbler?

What You Need: -Tumbler -vinyl or permanent adhesive paper

-scissors -ruler or a straight edge -Mod Podge Dishwasher Safe Gloss sealer

-foam brush -LED tea light candle -hot glue gun and glue sticks. Instructions: 1. Begin by washing your tumbler with soap and water.

This will remove any dirt or debris that may be on the surface of the cup. Rinse the tumbler well and allow it to dry completely. 2. Cut a piece of vinyl or adhesive paper to fit around the circumference of your tumbler.

Make sure that the design is centered and level before you begin applying it to the cup. Slowly peel away the backing of the vinyl and apply it to the tumbler, pressing down as you go along to avoid any air bubbles from forming. 3. Once the vinyl is applied, use a foam brush to apply an even layer of Mod Podge over top of it.

Be sure to seal all edges well. Allow the Mod Podge to dry completely before moving on to the next step. 4. Place an LED tea light candle inside your tumbler (make sure that it has fresh batteries first!) and then use hot glue around the rim of the opening at the bottom ofthe cup to secure it in place .

Flip your light up tumbler over and enjoy!

Christmas Light Up Tumbler Tutorial | LED Lights | No Drilling!

• Purchase a light up tumbler from a local store or online retailer
• Follow the instructions that come with the tumbler to insert batteries and turn on the lights
• Use the tumbler as desired
• The lights will turn on and off automatically when the tumbler is moved

Strawbler Tumbler With Lights

This is the perfect drink tumbler for any party! The Strawbler Tumbler With Lights features 16 built-in LED lights that will make your drinks look even more amazing. This tumbler is made of double-walled stainless steel and can hold up to 16 ounces of your favorite beverage.

It also comes with a detachable straw and a carrying case, so you can take it with you wherever you go!

Credit: counterculturediy.com

How Do You Make a Tumbler Glow in the Dark?

One way to make a tumbler glow in the dark is to use phosphorescent paint. You can buy this type of paint at most craft stores. Simply apply the paint to the outside of the tumbler and allow it to dry.

The tumbler will then glow in the dark when exposed to light.

What Do I Need to Make Tumblers at Home?

If you’re looking to make your own tumblers at home, there are a few things you’ll need to get started. First, you’ll need something to cut the glass. You can use a scoring tool or a glass cutter.

Next, you’ll need something to grind the edges of the glass smooth. You can use a handheld grinder or an electric one. Finally, you’ll need some sort of adhesive to attach the handles or other decorations to the glass.

Epoxy glue is a good option for this. Once you have all of your supplies, it’s time to start making your tumblers! Begin by measuring and cutting the pieces of glass for your tumblers.

If using a scoring tool, score the line around the circumference of each piece before breaking it off. If using a glass cutter, simply cut along the desired line. Once all of your pieces are cut, use the grinder to smooth out any sharp edges.

Now it’s time to assemble your tumblers! Apply some epoxy glue around the edge of one piece of glass and attach it to another piece until all sides are glued together. Allow the glue to dry completely before moving on to attaching handles or other decorations (if desired).

Your tumblers are now complete!

How Do You Transfer an Image to a Tumbler?

One of the most popular ways to customize a tumbler is by adding an image. Whether it’s a photo, design or logo, there are several methods that can be used to transfer an image onto a tumbler. Here are some of the most common methods:

1. Decal Method: This is probably the most popular and easiest method for transferring an image to a tumbler. All you need is your desired decal (you can purchase these online or make your own) and some clear packing tape. Simply place the packing tape over the decal and then use a credit card or other hard object to smooth out any bubbles.

Next, peel off the backing of the decal and apply it to your clean tumbler. Use your fingers to gently press down on the decal until it’s fully adhered. Finally, remove the packing tape and voila!

You’ve successfully transferred your decal onto your tumbler! 2. Paint Method: If you want a more permanent solution, you can try painting your image directly onto the tumbler with acrylic paint pens or regular acrylic paints thinned out with water. This method does require some freehand drawing skills (or stencils/tracing if needed), but it’s definitely doable!

Simply sketch out or trace your desired image onto the tumbler with a pencil first before going over it with paint pens or paintbrush dipped in thinned-out acrylic paint. Once dry, seal everything with a layer of clear Mod Podge or similar sealant for durability.

3. Vinyl Sticker Method: Another popular method for transferring images onto tumblers is using vinyl stickers!

This works similarly to using decals, but instead of using packing tape you’ll need transfer paper (which usually comes included when purchasing vinyl stickers). First, cut out your vinyl sticker(s) and then weed away any excess material so only your desired design remains on the sticky backing paper. Next, place the weeded sticker design ontoyour clean tumbler surface and use a hard object like acredit card topress down onitandremove any air bubbles.

Finally, peel offtheclear transfer paperto revealyour newly appliedvinyl sticker(s)!

How Do I Make a Custom Tumbler Without Epoxy?

There are a few ways that you can make a custom tumbler without epoxy, but most of them require some sort of specialized equipment or materials. One way is to use a rotary tool with a grinding bit to carve your design into the side of the tumbler. Another way is to use a laser cutter to engrave your design into the side of the tumbler.

If you have access to a 3D printer, you could also print out your design and then glue it onto the side of the tumbler.

Conclusion

Looking for a fun and easy DIY project? Why not try making your own light up tumbler! This tutorial will show you how to do just that.

You’ll need: -A plastic tumbler -LED tea lights

-Clear silicone sealant -A drill with a small bit size First, wash and dry your tumbler.

Next, use the drill to make two holes near the top of the tumbler. Make sure the holes are big enough to fit your LED tea lights snugly. Now it’s time to add the lights!

Insert an LED tea light into each hole and then apply clear silicone sealant around each light. Be sure to smooth out any rough edges of sealant. Let the sealant dry for 24 hours before using your new light up tumbler.

Enjoy!