How to Turn off Clean Light on Braun Coffee Maker?

To turn off the clean light on your Braun coffee maker, simply press and hold the “Clean” button for 3 seconds. The clean light will then turn off and your coffee maker will enter standby mode.

  • Unplug the Braun coffee maker from the power outlet
  • Remove the water tank from the coffee maker by lifting it straight up
  • Pour out any water that is left in the tank
  • Locate the clean light on the front of the coffee maker, below the control panel
  • Press and hold the button next to the clean light for 3 seconds to turn it off
  • Replace the water tank on the coffee maker and plug it back in to the power outlet
How to Turn off Clean Light on Braun Coffee Maker?


How Do You Turn off the Clean Light on a Bunn Coffee Maker?

Assuming you’re referring to the “clean” light on a Bunn coffee maker that indicates it’s time to clean the machine: To turn off the clean light, simply run a cleaning cycle. This can be done by adding water and cleaning solution to the appropriate reservoirs and then pressing the clean button.

The machine will automatically go through a cleaning cycle, during which the clean light will be illuminated. Once the cycle is complete, the light will turn off.

How Do I Turn off the Clean Cycle on My Braun Coffee Maker?

If you’re like most people, you probably use your Braun coffee maker every day to make your morning cup of coffee. But what happens when you want to clean your coffee maker? Do you know how to turn off the clean cycle on your Braun coffee maker?

Here’s a quick guide on how to do just that: First, locate the power button on your Braun coffee maker. It should be located near the base of the machine.

Once you’ve found it, press and hold the power button for 3 seconds.

Related:  Is Land O Lakes Cheese Gluten Free?
Next, locate the clean button on your Braun coffee maker. This button is usually located next to the power button.

Once you’ve found it, press and hold the clean button for 3 seconds. Your Braun coffee maker will now enter cleaning mode and will start running water through its internal pipes. Depending on how dirty your machine is, this process can take anywhere from 30 minutes to an hour.

Once the cleaning cycle is complete, your Braun coffee maker will automatically shut off. You can now safely unplug it from its power source and enjoy a freshly brewed cup of coffee!

How Do You Reset the Clean Button on a Coffee Maker?

Assuming you’re talking about a Keurig coffee maker: To reset the clean button on your Keurig, start by unplugging the machine and emptying all of the water out of it. Next, use a damp cloth to wipe down the outside of the machine.

Then, mix together equal parts water and vinegar and pour this mixture into the water reservoir. Plug the machine back in and let it run until all of the vinegar has been dispensed into your cup. Once this is done, throw away the vinegar solution and run two cycles of fresh water through the machine to rinse it out completely.

Your Keurig should now be reset and ready to use!

How Do I Use the Clean Button on My Braun Coffee Maker?

Assuming you are talking about the Braun BrewSense Drip Coffee Maker, KF7150BK: The Braun BrewSense Drip Coffee Maker is equipped with a Clean button to help keep your coffee maker clean and functioning properly. Use the following steps to clean your machine:

1. Fill the water tank with fresh cold water and add two tablespoons of vinegar or lemon juice. 2. Place a coffee filter in the brew basket and close the lid. 3. Press and hold the Clean button for three seconds to start the cleaning cycle.

The display will show “Cleaning” while the machine is running. 4. When finished, open the lid and remove the coffee filter with any leftover debris. Rinse out the brew basket and replace it on the machine.

Related:  How to Cook Carnaroli Rice?

5. Run two more cycles with fresh cold water to rinse out any lingering vinegar or lemon juice taste. Discard this water after each cycle. 6. Your machine is now clean!


Clean Light Won’T Go off on Braun Coffee Maker

If you’re coffee maker is giving you trouble, there are a few things you can check before calling for service. First, make sure that the machine is plugged in and that the outlet it’s plugged into is working. If the machine still won’t turn on, try resetting it by unplugging it for 30 seconds and then plugging it back in.

If your coffee maker has a water filter, make sure that it’s clean and properly installed. A clogged water filter can prevent the machine from getting enough water to brew a pot of coffee. Braun recommends cleaning the coffee maker every two months with their descaling solution to remove built-up calcium deposits.

If neither of these solutions solve the problem, then you may need to call customer service for assistance.


If you’re not a fan of the bright clean light on your Braun coffee maker, there is a way to turn it off. All you need to do is unplug the machine and remove the small metal plate on the back. Once the plate is removed, there will be a white wire that needs to be cut.

After cutting the wire, reassemble your coffee maker and plug it back in. The clean light should now be off!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *